Vous pouvez activer les sous-titres dans les paramètres et sélectionner la langue que vous préférez.
Shim recommendations:
To achieve a perfect seal with your replica, you can easily adjust the kit using the shims already installed on it. This system has been designed to be as simple as possible: thanks to the height adjustment, you don't have to worry about small tolerance differences between parts. The kit thus fits many Glock-type replicas, including custom models.
And to make things easier for you, you can simply use the shim configurations shown in the table below. The configurations presented serve as a reference: you can of course modify them according to the tolerances or specificities of your replica.
(Shim adjustment must be done on both sides, using the 0.5mm and 1mm shims provided.)
G17 gen 4/5 Tokyo Marui
2.5 mm
AAP-01
1 mm
AAPC
1 à 1.5 mm
Cthulhu Lancer Tactical
1 mm
G17 gen 5 VFC/Umarex
2,5 to 3 mm
G19X / G45 VFC/Umarex
2,5 to 3 mm
P80 Janus Division
2,5 mm
Remarks : If you add too many shims, it will block the replica cycle. Conversely, if there is not enough, the attachment will not be tight enough and the cycle will not be complete. Experiment to find the optimal configuration for your replica.
Recommended pressure settings for the Infinite kit:
The Infinite kit delivers power ranging from 0.7 J to 1.4 Joules, depending on BB weight and air pressure (PSI). To ensure optimal performance with your GBB replica, we recommend using the pressure ranges listed below.
- Glock:
- Plastic slide: 60 to 110 PSI - Aluminum slide: 80 to 140 PSI - Steel slide: 120 to 160 PSI
- AAP-01: 70 to 140 PSI
It is important to note that there is no universal PSI value, even though some misconceptions still persist about this topic. When adjusting your pressure, several factors must be taken into account:
- Slide weight and added accessories (such as an RMR optic) directly affect performance. In general, the heavier your slide, the more power you will need to ensure a full cycle.
- The condition of the replica: regular cleaning and lubrication of moving parts, as well as the condition and strength of the springs (especially the hammer spring), also play a key role. Well-maintained components improve both efficiency and durability.
- Remaining air in your HPA tank: as tank pressure decreases, the available pressure for your replica also drops. This can lead to less optimal performance, especially when the tank is nearing depletion.
1 comment
When are you bringing one version for Hi capa please..